Home
Gallery
Register
Log inWiper control on 2000 G 500
Page 1 of 1•
Wiper control on 2000 G 500
by Ed Mclass on Thu Apr 03, 2008 2:07 pm
My wiper works on two speeds, but no on intermittent or delay. I can hear the control kicking in, but it just hums. It must be the relay. Does any one have the part # and diagram of the relay? Thank you! 
Re: Wiper control on 2000 G 500
by DUTCH on Thu Apr 03, 2008 4:21 pm
Ed Mclass wrote:My wiper works on two speeds, but no on intermittent or delay. I can hear the control kicking in, but it just hums. It must be the relay. Does any one have the part # and diagram of the relay? Thank you!
Ed, Email or PM me your VIN; and I'll see what I can find.
Re: Wiper control on 2000 G 500
by Ed Mclass on Fri Apr 04, 2008 8:15 am
Okay. When it quits raining!
Re: Wiper control on 2000 G 500
by cmitch on Fri Apr 04, 2008 9:51 am
Ed Mclass wrote:Okay. When it quits raining!
That's going to be awhile!
Re: Wiper control on 2000 G 500
by Ed Mclass on Fri Apr 04, 2008 11:30 am
. . . . . .or not! Grass will be cut someday! 
Re: Wiper control on 2000 G 500
by DUTCH on Fri Apr 04, 2008 3:49 pm
Ed,
The relays are located behind the fuse panel just above the front passenger's feet. Some require dropping the fuse panel itself to access them behind it. After you drop the padded access panel, there are two screws at the top edge of the fuse panel. Remove those and the fuse panel folds down to access more relays behind it.
You could probably do a touch and feel to find the right one. The P/N is usually printed on the relay.
DUTCH
The relays are located behind the fuse panel just above the front passenger's feet. Some require dropping the fuse panel itself to access them behind it. After you drop the padded access panel, there are two screws at the top edge of the fuse panel. Remove those and the fuse panel folds down to access more relays behind it.
You could probably do a touch and feel to find the right one. The P/N is usually printed on the relay.
DUTCH